Compliance

• Australian Standards AS 1735.18 (private residences)
• European Lift Directives

Passenger Protection

• FULL HEIGHT LIGHT RAY (180 beam) protection is standard

Drive Mechanism & Power Requirements

• Silent Electric Traction Lift with 48v DC motor
• Single Phase 20amp
• Energy Consumption is only 400w versus 3000w (about the same as a regular home appliance like a TV or fridge)
• Backup Batteries permit the unit to drive for up to 20 runs during a power failure

Car Sizes

• Custom sizes to suit
• BCA E3.6 compliant size available for those of limited mobility/wheelchairs
• Maximum width 1200mm
• Maximum depth 1500mm
  
• Alternate sizes (optional)

Capacity & Speed

• 480kg with 250mm pit / 630kg with 350mm pit
• 7 persons / 8-9 persons
• 0.30m/s

Floors Served & Travel

• Maximum floors: 6
• Maximum travel: 12000mm

Opening to Lift Car

• Front/ single entry
• Opposite through car
• Adjacent through car
• Maximum openings: 2 under Australian Standards

Machine room location

• NOT REQUIRED for NON-FIRE RATED SHAFT
• Where fire rating is required, a space 320mm(wide) x 200mm(deep) x 2100mm(high) is required up to 7000mm away from the shaft

Control

• Automatic buttons with key isolation to the lift cabin
• Automatic return to false or nominated floors (optional)
  
• Automatic return to false or nominated floors (optional)
• Security features (optional)
• Limited mobility access features like braille (optional)

Doors

• Automatic Side Opening
• Automatic Centre Opening (optional)
  
• Huge range of finishes to select from including stainless steel and panoramic glass doors
• Range of door widths (600mm x 1000mm) in 50mm increments
• Jamb is additional 100mm on either side and above
• Swing door solutions (optional)
• Fire rating 1 or 2 hour (optional)

Landing Buttons

• Illuminated and included in door jamb as standard
• Separate button box at nearby location (optional)
• Security features (optional)

Cabin Finishes

• Select from our huge range
• Custom cabins available
• Glass walls (optional)
• Mirror walls (optional)
• Handrails (optional)

Building requirements

• Pit 250mm for 480kg solution
• Pit 350mm for 630kg solution
• Headroom (finished floor level at top floor to inside top of shaft) 2800mm
• REDUCED HEADROOM OF 2650mm (optional)